Description

Compact Electric Cleaning Power Built for the Homeowner The BE Power Equipment P2018EN 2,000 PSI 1.8 GPM Electric Pressure Washer offers reliable cleaning performance in an exceptionally compact package. Designed for homeowners who want effective pressure without the weight or maintenance of a gas unit, this model gets right to work on driveways, siding, patios, decks, and vehicles. With a BE 1.3 HP electric motor, maintenance-free BE axial pump, and Total Stop System, it delivers consistent pressure every time you pull the trigger. At just 27 lbs and measuring 12″ x 18″ x 12″, the P2018EN has the smallest footprint in the BE electric pressure washer range — compact enough to store under a workbench, in a closet, or in a car trunk, without sacrificing the cleaning performance you need for routine home maintenance. Key Features Pressure Rating: 2,000 PSI for strong cleaning across multiple surfaces Flow Rate: 1.8 GPM for water-efficient performance Motor: BE 1.3 HP / 13 Amp / 120V electric motor with Total Stop System Pump: BE axial pump at 3,450 RPM — sealed crankcase, no oil changes required Nozzles Included: 0°, 15°, 25°, 40°, Rotary Turbo, and High-Pressure Foam Cannon QC Nozzles Mobility: 8″ rear wheels and swivel front wheels for easy positioning and smooth movement Accessory Storage: Integrated wand, spray gun, and hose holders keep tools organized Convenience: Quiet electric operation — no fuel, fumes, or oil changes required Power Where It Matters Most With 2,000 PSI and 1.8 GPM output, the P2018EN delivers practical cleaning performance for everyday residential tasks. It cuts through grime, dirt, and mildew on concrete, vinyl, metal, and wood. The BE axial pump runs at 3,450 RPM and is completely maintenance-free — no oil changes, tune-ups, or seals to service. Just plug it in, pull the trigger, and clean. BE Electric Motor with Total Stop System The BE 1.3 HP / 13 Amp electric motor delivers smooth, consistent output without the noise, vibration, or fumes of a gas engine. Rated at 120V, it plugs into standard household outlets with a GFCI-protected 35 ft. power cord. The Total Stop System automatically shuts off the motor and pump when the trigger is released — reducing wear, conserving energy, and extending pump service life. Smooth and quiet operation Total Stop System — motor shuts off automatically when trigger is released Thermal relief valve protects the pump during extended operation No fuel, no seasonal maintenance, no emissions Designed for Mobility The P2018EN rolls easily on 8″ rear wheels and swivel front wheels that glide across pavement, grass, and gravel. The swivel front wheels allow easy directional changes without lifting the unit, and the locking function keeps it stable during operation so it doesn’t roll away mid-job. Smart Storage in a Small Package The built-in hose holder and dedicated wand and spray gun storage keep your accessories organized and immediately accessible. The compact square footprint — just 12″ x 18″ x 12″ — makes this unit easy to store in tight spaces: garages, sheds, closets, or even car trunks. It’s the most compact electric pressure washer in the BE Workshop range. Six Quick-Connect Nozzles for Any Task The P2018EN ships with the most complete nozzle set in the BE Workshop electric range — six quick-connect nozzles covering everything from pinpoint stripping to broad foam application: 0° Nozzle: Maximum-intensity pinpoint stream for the toughest surface deposits 15° Nozzle: Targeted pressure for concrete, driveways, and hard surfaces 25° Nozzle: General-purpose spray for decks, siding, and equipment 40° Nozzle: Wide-angle rinse for vehicles and delicate surfaces Rotary Turbo Nozzle: Spinning jet stream for faster cleaning of large areas High-Pressure Foam Cannon: Applies detergent evenly for vehicle washing and surface preparation Quick-connect fittings allow fast, tool-free nozzle changes. Always use the appropriate nozzle for the surface being cleaned to avoid damage. Common Cleaning Applications The P2018EN is well suited for a wide range of home maintenance tasks: Driveways and sidewalks: Clear mud, stains, algae, and seasonal grime Vehicles: Safe and effective on cars, trucks, motorcycles, and trailers House siding: Blast away cobwebs, mildew, and dirt buildup Decks and patios: Restore wood, pavers, and composite surfaces Outdoor furniture: Remove dust, grime, and winter residue Fast Setup, Easy Operation Getting started is straightforward. Connect your garden hose, attach the spray gun, plug into a GFCI-protected outlet, and you’re ready to clean. With quick-connect hose fittings, smooth-rolling wheels, and a lightweight 27 lb build, you’ll spend less time setting up and more time getting things clean. Quiet and Low-Maintenance The BE electric motor operates with low noise output — suitable for residential neighborhoods and weekend cleaning without disturbing neighbors. With no fuel to manage, no oil to change, and no seasonal maintenance requirements, the P2018EN stays ready to use whenever you need it. Warranty and Factory Testing The P2018EN is backed by a 1-year limited warranty from BE Power Equipment. Register your product to extend coverage to a 5-year registered warranty. Each unit is functionally tested at the factory before shipping. Your pressure washer may arrive with minimal residual water or odor, which confirms the unit has passed quality testing and is ready for use. Product Specifications Pressure: 2,000 PSI Flow Rate: 1.8 GPM Motor: BE 1.3 HP / 1 Phase / 13 Amp Electric Motor Pump: BE Axial, P1 Class, Built-In Unloader, Sealed Crankcase RPM: 3,450 Total Stop System: Yes — automatically shuts off when trigger is released Thermal Relief Valve: Yes Injector: High Pressure Foam Cannon Mobility: 8″ Rear Wheels and Swivel Front Wheels Voltage: 120V Cord Length: 35 ft. with GFCI Plug Series: Workshop Unit Weight: 27 lbs / 12.2 kg Unit Dimensions: 12.0″ x 18.0″ x 12.0″ Safety Features: Total Stop System, GFCI plug, thermal relief valve Warranty: 1-year limited / 5-year registered Included in the Box High-Pressure Hose with M22 Connection Split Lance Trigger Gun and Wand 0° QC Nozzle 15° QC Nozzle 25° QC Nozzle 40° QC Nozzle Rotary Turbo QC Nozzle High-Pressure Foam Cannon QC Nozzle Note: Product appearance may vary slightly from images shown due to ongoing product improvements. Package Information Unit Weight: 27 lbs / 12.2 kg Unit Dimensions: 12″ x 18″ x 12″ Box Weight: 33 lbs / 15 kg Box Dimensions (L x W x H): 12″ x 18″ x 12″ Compact Power for Everyday Home Cleaning The BE Power Equipment P2018EN delivers 2,000 PSI of residential cleaning power in the most compact form factor in the BE Workshop electric range. At 27 lbs and 12″ x 18″ x 12″, with 8″ rear wheels, swivel front wheels, a six-nozzle quick-connect set, and a maintenance-free BE axial pump, the P2018EN is built for homeowners who want effective, organized, and easy-to-store cleaning performance without any of the complexity of gas-powered equipment. P2018EN — 2,000 PSI 1.8 GPM Cold Water Corded Electric Pressure Washer.